H3C Technologies H3C S5800 Series Switches - Manual (Page 63)

53
Figure 51 Remove the DC power cord
(1) Press the tabs on the power cord connector with your thumb
and forefinger (2) Pull the power cord connector out
Figure 52 Remove the power module
(1) Pivot the latch to the right with your thumb (2) Pull the power module out
CAUTION:
•
Put the removed power module in an antistatic bag.
• The LSVM1AC650, LSVM1DC650, LSVM1AC300, and LSVM1DC300 power modules do not have a
power switch. You do not need to switch on or switch off the power module as described in the
installation and removal procedures in
Figure 47 and Figure 48 .