H3C Technologies H3C S5800 Series Switches - Manual (Page 25)

15
NOTE:
The S5800-32F switch comes with power module slot 1 empty and power module slot 2 covered by a filler
panel. You can install one or two power modules for the switch as needed. In this figure, two PSR150-A
AC power modules are installed in the slots.
Ports
Console port
Every S5800 switch has one console port.
Table 4 Console port specifications
Item Specification
Connector type RJ-45
Compliant standard EIA/TIA-232
Transmission baud rate 9600 bps (default) to 115200 bps
Services
• Provides connection to an ASCII terminal.
• Provides connection to the serial port of a local or remote (through a pair of
modems) PC running terminal emulation program.
Management Ethernet port
The S5800-32F and S5800-54S switches have a management Ethernet port. You can connect this port
to a PC or management station for loading and debugging system software or remote management.
Table 5 Management Ethernet port specifications
Item Specification
Connector type RJ-45
Connector quantity 1
Port transmission rate 10/100/1000 Mbps, half/full duplex
Transmission medium and max
transmission distance
100 m (328.08 ft) over category-5 twisted pair cable
Functions and services Switch software and Boot ROM upgrade, network management
USB port
Every S5800 switch has one OHC-compliant USB2.0 port that can upload and download data at a rate
up to 12 Mbps. You can use this USB port to access the file system on the Flash of the switch, for example,
to upload or download application and configuration files.