H3C Technologies H3C S5800 Series Switches - Manual (Page 45)

35
Table 31 Install other models of switches (except the S5800-54S) in the rack
Mounting bracket position Installing the mounting
brackets
Installing the chassis
rails and slide rails
Installing the switch
• Rear mounting (near the
power supplies)
• Front mounting (near the
network ports)
• Mid-mounting
See " Attaching the
mounting brackets to the
switch chassis (for all
S5800 switches except
the S5800-54S) ."
Not required.
See " Rack-mounting
an S5800 switch
except the
S5800-54S ."
Mounting bracket and cable management bracket kits
Table 32 Mounting bracket and cable management bracket kits for the H3C S5800 Switch Series
Switch models Mounting brackets Cable management
brackets
Bracket view
S5800-56C-PWR
S5800-56C
S5800-32C-PWR
S5800-32C
S5800-32F
S5800-54S
One pair of 1U
mounting brackets
(supplied with the
switch)
N/A See Figure 25 .
S5800-60C-PWR
One pair of 2U
mounting brackets
(supplied with the
switch)
One pair (supplied
with the switch)
The mounting brackets and cable
management brackets are secured
together by default (see Figure 26 ).
Figure 25 1U mounting bracket kit
The S5800-60C-PWR switch comes with a pair of cable management brackets for managing and
routing cables. When shipped, the cable management brackets are secured to the mounting brackets, as
shown in
Figure 26 .