H3C Technologies H3C S10500 Series Switches - Manual (Page 35)

34
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
Step15 Type 0 to return to the BootWare operation menu, and type 0 in the BootWare operation menu to return
to the BootWare menu.
Step16 Type 0 in the BootWare menu to reboot the switch.
NOTE:
After the startup, change the baud rate of the HyperTerminal back to 9600 bps by following Step 6
through Step 8.
Managing files
You can display files, set system software image type, and delete files from the BootWare menu. Type 4
in the BootWare menu to enter the following file control menu.
===============================================
|Note:the operating device is flash |
| <1> Display All File(s) |
| <2> Set Application File type |
| <3> Delete File |
| <0> Exit To Main Menu |
=============================================================
Enter your choice(0-3):
NOTE:
For how to manage files from the CLI, see the Fundamentals Configuration Guide in the H3C S10500
Switch Series Configuration Guides.
Display files
Type 1 in the file control menu to display all files.
Display all file(s) in flash:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
============================================================================
|NO. Size(B) Time Type Name |
|1 31912384 May/23/2000 144:40:5 N/A main.bin |
|2 4224 Apr/12/2000 08:47:53 N/A private-data.txt |
|3 5764 Apr/12/2000 08:48:09 N/A startup.cfg |
|4 4866 Apr/12/2000 08:48:03 N/A system.xml |
|5 31911744 Apr/06/2000 17:23:33 M s10500.bin |
|6 4 Apr/10/2000 22:11:31 N/A snmpboots |
|7 9176 Apr/11/2000 17:44:02 N/A patch.bin |
|8 1526 Apr/02/2000 01:02:50 N/A patchstate |
|9 5844 Apr/11/2000 22:09:07 N/A test/my_archive_1.cfg |
|10 118773 Apr/11/2000 21:17:30 N/A logfile.log |
============================================================================
==============================================================