H3C Technologies H3C S10500 Series Switches User Manual
Page 33
32
Step8
Select Call/Call to re-connect to the switch.
Figure 10 Connect to the switch
Press Enter, and the following information appears.
The current baudrate is 19200 bps
===============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------
|<1> 9600(Default) |
|<2> 19200* |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
============================================================================
Enter your choice(0-5):
Step9
Type 0 to return to the serial submenu.
====================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
Step10
Type a number from 1 to 3 as needed. For example, type 1 to upgrade the entire BootWare. The
following information appears.
Please Start To Transfer File, Press
Waiting ...CCCC
Step11
Select Transfer > Send File in the HyperTerminal window. In the Send File dialog box that appears, click
Browse to select the target .btw file, and select Xmodem as the protocol.