H3C Technologies H3C S10500 Series Switches User Manual
Page 21
20
===============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
============================================================================
Enter your choice(0-5):2
Step4
Select an appropriate download baud rate. For example, type 2 to select 19200 bps. The following
information appears:
Baudrate has been changed to 19200 bps.
Please change the terminal's baudrate to 19200 bps, press ENTER when ready.
NOTE:
If you select the baud rate of 9600 bps, directly go to Step 8.
Step5
Disconnect the HyperTerminal from the switch by selecting Call/Disconnect in the HyperTerminal
window.
Figure 1 Disconnect the terminal
Step6
Select File > Properties in the HyperTerminal window, click Configure in the popup dialog box, and
select the baud rate of 19200 bps in the console port properties dialog box.