H3C Technologies H3C S10500 Series Switches User Manual
Page 27
26
============================================================================
Protocol (FTP or TFTP):tftp
Load File Name :test.btw
:mpu.btw
Target File Name :test.btw
:mpu.btw
Server IP Address :192.168.80.22
Local IP Address :192.168.80.10
Gateway IP Address :0.0.0.0
======================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :test.btw
:mpu.btw
Target File Name :test.btw
:mpu.btw
Server IP Address :192.168.80.22
Local IP Address :192.168.80.10
Gateway IP Address :0.0.0.0
Table 4 Output description
Field Description
Load File Name
Name of the file to be downloaded
Target File Name
Name of the file downloaded to the switch, which must have the same suffix
as the file to be downloaded
Gateway IP Address
Needed when the client and server reside on different subnets
Step6
After you set TFTP parameters, the system returns to the Ethernet submenu.
===================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
Step7
Type a number from 1 to 3 as needed. For example, type 1 to upgrade the entire BootWare. The
following information appears.
Loading...........Done!
447612 bytes downloaded!
Updating Basic BootWare? [Y/N]
Step8
Type Y to upgrade basic BootWare. After the upgrade is complete, the following information appears.
Updating Basic BootWare.........Done!