H3C Technologies H3C S10500 Series Switches - Manual (Page 29)

28
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
Step5 Type 4 to set Ethernet port parameters.
NOTE:
•
If no parameters are set, pressing Enter adopts the default settings.
• You only need to configure settings under . Settings under
do not affect software upgrade.
=============================================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP):ftp
Load File Name :test.btw
:mpu.btw
Target File Name :test.btw
:mpu.btw
Server IP Address :192.168.80.20
Local IP Address :192.168.80.10
Gateway IP Address :0.0.0.0
FTP User Name :UserN
FTP User Password :PWD
=============================================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP):ftp
Load File Name :test.btw
:mpu.btw
Target File Name :test.btw
:mpu.btw
Server IP Address :192.168.80.20
Local IP Address :192.168.80.10
Gateway IP Address :0.0.0.0
FTP User Name :UserN
FTP User Password :PWD
Table 5 Output description
Field Description
Load File Name Name of the file to be downloaded
Target File Name
Name of the file downloaded to the switch, which must have the same suffix
as the file to be downloaded