Using ftp through the management ethernet port – H3C Technologies H3C S10500 Series Switches User Manual

Page 18

Step6

Type a number from 2 to 4 as needed. For example, type 2 to update the main system software image.

The following information appears.

Loading.....................................................................

............................................................................

.........................Done!

31911744 bytes downloaded!

Updating File flash:/main.bin...............................................

....................................................Done!

====================================================

|Note:the operating device is flash |

|<1> Download Application Program To SDRAM And Run |

|<2> Update Main Application File |

|<3> Update Backup Application File |

|<4> Update Secure Application File |

|<5> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

| |

============================================================================

Enter your choice(0-5):

Step7

Type 0 to return to the BooWare menu, and type 1 in the BootWare menu to boot the switch.

Using FTP through the management Ethernet port

Step1

Connect the management Ethernet port of the switch to the PC that stores the target .bin file (the IP

address of the PC is required), and connect the console port of the switch to the same or another PC.

Step2

Run the FTP server program on the PC connected to the management Ethernet port, specify the file

storage directory, and set the username and password.

NOTE:

S10500 switches are not shipped with FTP server software. Prepare it by yourself.

Step3

Run the terminal emulation program on the PC connected to the console port. Start the switch, enter the

BootWare menu (see

BootWare menu

for more information), and press 3 when you see "Enter your

choice(0-9):" to enter the Ethernet submenu.