H3C Technologies H3C S10500 Series Switches User Manual
Page 24
23
Step8
Type 0 to return to the serial submenu.
===========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-5):
Step9
Type a number from 2 to 4 as needed. For example, type 2 to update the main system software image.
The following information appears.
Please Start To Transfer File, Press
Waiting ...CCCCC
Step10
Select Transfer > Send File in the HyperTerminal window. In the Send File dialog box that appears, click
Browse to select the target .bin file, and select Xmodem as the protocol.
Figure 5 Send file dialog box
Step11
Click Send. The following dialog box appears: