Epson EISA Desktop - Manual (Page 80)

Installing
Option Cards
Follow these steps to install an option card:
1. Unpack the option card and adjust any switches or jumpers
on it, if necessary. Check the option card instructions and
any of the jumper and switch settings you viewed when
you ran the System Configuration program. See Chapter 2
for more information.
2. Remove the retaining screw from the top of the metal option
slot cover and lift out the slot cover, as shown below.
Keep the screw to secure the option card to the computer. Store
the slot cover in a safe place in case you remove the option
card later.
Installing and Removing Options 5-5