Epson EISA Desktop - Manual (Page 116)

Use or or type the number of the desired option
to highlight a test and then press to run it.
Note
If you selected to run the tests more than once, you do
not see a submenu. The program immediately begins
executing all the tests that do not destroy data.
5. When the test is completed, you see the Execute menu or the
test submenu again. You can select another test or exit the
menu.
To exit System diagnostics, press to select Quit and
press [Enter. You return to the System Configuration
program Main Menu.
Resuming From an Error
If an error prevents a test from running, you see a Runtime
Error information box. Follow the instructions on the screen to
solve the problem.
If an error occurs during a test, the test stops and an error
message appears. If you want to record the problem, you can
print the message on your printer. You see this prompt:
Do you
want a printout
of the
error
message(s) ?
( Y / N )
To continue without printing, press and
To print the message, press and The program prints
the message. Then press again.
For a complete list of the error messages the program may
display, see the table at the end of this appendix.
A-6 Running System Diagnostics