Epson EISA Desktop - Manual (Page 142)

When the computer reboots, you see the Enter password
prompt. Enter the password to access your system.
Note
If you turned on network server mode when you set a new
password and then booted your system from the hard disk,
you do not see the Enter password prompt. Follow the
instructions in Chapter 3 to enter your password in network
server mode.
Keyboard Problems
Make sure the keyboard is securely connected to its port.
If you are still having problems, see “Power or Lock-up
Problems” above.
Monitor Problems
See the suggestions below if you have trouble with your
monitor display.
There
is
no display on the screen.
Make sure the monitor cables are securely connected to the
monitor, the computer, and the electrical outlet.
Check that the monitor’s power switch is on and that the
power light on the monitor is lit. If the power light is on but
you still do not see anything on the screen, check the
monitor’s brightness and contrast controls.
Check to see if the electrical outlet supplies power.
Troubleshooting C-11