Epson EISA Desktop - Manual (Page 148)

If necessary, make sure that you used the proper cable to
connect the device to the option card connector.
Memory Module Problems
If the memory count displayed by power-on diagnostics or
the System Configuration program is incorrect, you or your
dealer may not have installed the SIMMs correctly. The
SIMMs may be installed in the wrong sockets, they may be
the wrong type of SIMM, or they may not be inserted all the
way into their sockets.
If your dealer installed the SIMMs for you, contact your
dealer; do not attempt to correct the problem yourself. If
you installed them, see “Memory Modules” in Chapter 5
and make sure you followed all the instructions correctly.
Check the speed of your SIMMs. Install only 70ns, 36-bit,
72-pin, gold-leaded, fast-page mode SIMMs.
Be sure to run the System Configuration program after you
install or remove memory modules to automatically update
your configuration. See Chapter 2 for instructions.
If you are still having trouble with your SIMMs, write
down any error messages you see and contact your dealer.
Mouse Problems
Make sure that your mouse is securely connected to its
port.
Check to see if you installed your mouse driver program
and loaded it into your computer’s memory correctly.
Troubleshooting C-17