Epson EISA Desktop - Manual (Page 36)

Configuring Your System
Follow the instructions in this section and on your screen to
configure your computer using the System Configuration
program. You configure your system in the following order:
Set the date and time
Add or remove boards; when you add an option card, the
program copies the necessary configuration files
View or edit the details of your configuration; use this
selection to define your configuration options
View your jumper and switch settings
Save the configuration as you exit the program.
Starting the Program
Follow these steps to start the System Configuration program
from the Reference 1 diskette:
1. Insert the Reference 1 diskette in drive A and turn on or reset
the computer.
Note
If you installed any EISA option cards in your system,
you see a message telling you to run the configuration
program. Press to continue.
2. After a moment, you see the title screen for the System
Configuration program. Press any key to continue. You see
the Welcome screen.
2-6 Running System Configuration