Amer Networks WS6028 Web GUI - Manual (Page 93)

Basic Management Configuration Chapter 19 Management
19-7
Notify SNMP view—configures the SNMP view name with the notify permission.
Operation—add or delete
Example: input the SNMP group as UserGroup, select the security level as authPriv,
input max in the three SNMP views, select the operation as add. Click “apply” to complete
the group creation as below:
19.2.1.3 Views
Click management->SNMP configuration->SNMP authentication->views to add or
delete the SNMPv3 views.
SNMP view—configures the view name; it includes 1 to 32 characters.
OID—the OID or the corresponding node name, it includes 1 to 255 characters.
Type—configures the “include/exclude” for this OID.
Operation—add or delete.
Example: input the SNMP view as max, input the OID as 1.3.6.1.4.1.6339, select the
type as “Include”, and select the operation as add. Click “apply” to complete the view
creation as below:
19.2.1.4 SNMP Engine id Configuration
Click management->SNMP configuration->SNMP authentication-> SNMP engine id
configuration to configure the engine id.
Engine id—the engine id, it includes 1 to 32 hex characters.