Amer Networks WS6028 Web GUI - Manual (Page 103)

Basic Management Configuration Chapter 19 Management
19-17
The content includes:
Debug command—the connection status of the tested switch
show clock—shows the current time
show cpu usage—shows the CPU usage information under the current running status
show memory usage—shows the memory usage information under the current
running status
show flash—shows the FLASH file information
show running-config—shows the current parameters configuration
show switchport interface—shows the property of the VLAN interface
show tcp—shows the TCP which is connected to the switch currently
show udp—shows the UDP which is connected to the switch currently
show telnet login—shows the client information which is connected to the switch
show version—shows the system version information of the switch
19.6.1 Debug Command
Click management->maintenance and debugging command->debug command to
enter into the configuration page as below and configure the basic host configuration,
PING and traceroute.
basic configuration configures the mapping between the switch and the IP address.
Example: configure the host name as switch, configure the IP address as 200.121.1.1
and click “apply” to complete the configuration as below: