Chapter 17 trap and syslog, 1 snmp traps, 1 wireless global traps – Amer Networks WS6028 Web GUI User Manual
Page 66
Basic Management Configuration Chapter 17 Trap and Syslog
17-1
Chapter 17 Trap and Syslog
Click “WLAN configuration->advanced config->trap and syslog” to enter into the trap
and syslog configuration page for the SNMP and syslog configuration.
17.1 SNMP Traps
Before enabled SNMP trap, configure the SNMP management to enable the on-off
function.
In the tab of management->SNMP configuration->SNMP management, select “open”
for the SNMP agent state and click “apply” to enable the SNMP management on-off.
17.1.1 Wireless Global Traps
In the section of SNMP trap configuration, select to enable the wireless global traps
on or off.
Click “submit” to save the configuration. Each wireless trap will be effective only after
the wireless global traps on-off is enabled. You can view the configuration on the network
management tab.