Amer Networks WS6028 Web GUI - Manual (Page 56)

Basic Management Configuration Chapter 13 AP Image Upgrading
13-1
Chapter 13 AP Image Upgrading
13.1 AP Image Auto Upgrade
The automatic upgrading can load the AP firmware version to the flash of the AC.
When another AP is connected and discovers the new firmware version, it will download
the new file.
Configure the AP image auto upgrade:
1. Choose AP auto upgrade mode and click “submit” to start the AP image auto
upgrade:
2. Choose AP image type as below:
When view the table for hardware type supported by Image type, click the following
content to view it:
3 Add the AP Image URL.
Add the AP image URL in the box as below:
Click “add” as below:
Click “modify” to modify the AP image URL; to remove it, click on the delete button.
4. Click “integrated AP image availability table” list to view the configured AP image.
13.2 AP Manual Upgrade Configuration
The AP manual upgrade configuration means the process of updating the firmware is
done by the user. The ability to select and upgrade a specific AP is available here.
1. Add the AP Image URL to start the configuration as below: