Amer Networks WS6028 Web GUI - Manual (Page 84)

Basic Management Configuration Chapter 18 Monitor
18-17
The detected client’s roam history can show the roam history of the client which is
being associated or which had been associated but no longer connected. The following
figure show the roam history of the client whose mac is c0-cb-38-3e-1a-6d:
The AP MAC is the one of the current AP that the client roams to.
18.4 RF Scan
Click monitor->RF scan to enter into the RF scan page. It includes AP RF scan status
and client dynamic blacklist.
18.4.1 AP RF Scan Status
AP RF scan status shows all the APs’ information as shown below:
AP RF scan status list describes all the APs’ status in the wireless network and the
AP monitors the RF environment including client and AP information. It will send the
monitored information periodicity to the associated AC.
MAC address: the MAC address of the scanned AP.
SSID: the network SSID sent by the scanned AP.
Physical mode: the radio mode that the scanned AP works in.
Channel: the channel that the scanned AP works on.
Status: the status of the scanned AP including unknown, managed and rogue.
Age: the interval from the last scanning to current.
Click “view detail” to view the RF scan status of one AP. Click “delete all” to delete all
the scanned APs. Click “manage” to add the selected AP into the AP database. Click
“refresh” to refresh the scan information.
18.4.2 AP RF Scan Detail