Amer Networks WS6028 Web GUI - Manual (Page 102)

Basic Management Configuration Chapter 19 Management
19-16
19.5 Telnet Server Configuration
Click management->Telnet server configuration to configure the Telnet server state
and max numbers of telnet access connection.
19.5.1 Telnet Server State
Click management->Telnet server configuration->Telnet server state to configure it.
Example: select the Telnet server state as “open” and click “apply” to start the Telnet
server as below:
19.5.2 Max Numbers of Telnet Access
Connection
Click management->Telnet server configuration->max numbers of Telnet access
connection to configure it.
Example: configure the Telnet access connection number as 10 and click “apply” to
complete the configuration.
19.6 Maintenance and Debugging Command
Click management-> maintenance and debugging command to enter into the
configuration page.