Amer Networks WS6028 Web GUI - Manual (Page 46)

Basic Management Configuration Chapter 10 WIDS Security
10-2
Wired network detection interval (seconds)—configures the shortest waiting
interval of every detection and the default value is 60s.
Managed SSID from an unknown AP—enables/disables the detection of the illegal
AP imitating the lawful SSID.
AP without an SSID—enables/disables the detection that no SSID field in Beacon
frame.
Managed SSDI detected with incorrect security—enables/disables the detection
that AP uses the incorrect security authentication mode.
AP is operating on an illegal channel—enables/disables the detection that the
Beacon frame of managed AP is received on the illegal channel.
Unexpected WDS device detected on network—enables/disables the detection of
an AP that is working in the WDS mode.
AP de-authentication attack—enables/disables the rogue AP mitigation function.
OUI database mode—configures the OUI database mode used in OUI legality
detection.
Unmanaged AP detected on wired network—enables/disables the detection of the
unmanaged AP accessing the wired network.
10.2 Client Configuration
Select the client configuration->WIDS client configuration page to configure this
section as listed below.
Not present in OUI database test—enables/disables the OUI legality detection.
Configured authentication rate test—enables/disables the authentication requests
frame flood attacks detection.
Configured de-authentication requests rate test—enables/disables the
de-authentication requests frame flood attacks detection.
Configured disassociation rate test—enables/disables the disassociation requests
frame flood attacks detection.
Authentication with unknown AP test—enables/disables the detection of lawful
client associating with an unknown AP.
Known client database lookup method—configures the method of the known client
database lookup and it includes two methods of local and radius.
Dynamic blacklist mode—enables/disables the dynamic blacklist function.