Amer Networks SS2GD8I - Manual (Page 61)

55
Figure 3-55: Configure File Path Page
Export File Path: The name and path to use when saving the file.
Export Start: Export the switch’s startup configuration stored in flash to the local computer.
Export User-Conf: Export the switch’s user configuration stored in flash to the local computer.
Import File Path: The name and path to use when retrieving the file.
Import Start: Overwrite the switch’s startup configuration stored in flash with the file from the local
computer.
Import User-Conf: Overwrite the switch’s user configuration stored in flash with the file from the local
computer.
3.18 Diagnostics
Three functions including Diagnostics, Loopback Test and Ping Test are contained in this section for self-
diagnostics. Each of them will be described in the following sections.
3.18.1 Diagnostics
The Diagnostics page (Figure 3-56) provides a set of basic system diagnoses. It lets the user know
whether the system is healthy or needs to be repaired. The basic system check includes EEPROM test,
UART test, DRAM test and Flash test.
Figure 3-56: Diagnostics Page