Amer Networks SS2GD8I - Manual (Page 110)

104
set speed-duplex
Syntax: set speed-duplex
Description: Sets the speed and duplex of a port(s).
Arguments:
: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
: the speed of the port, can be any of the following:
auto - set auto-negotiation mode
10half - set speed/duplex 10M Half
10full - set speed/duplex 10M Full
100half - set speed/duplex 100M Half
100full - set speed/duplex 100M Full
1Gfull - set speed/duplex 1G Full
Example:
SS2GD8I(port)# set speed-duplex 5 auto
show conf
Syntax: show conf
Description: Displays each port’s state, speed-duplex and flow control.
Arguments: None.
Example:
SS2GD8I (port)# show conf
show detail-counter
Syntax: show detail-counter <#>
Description: Displays the detailed counter for each port.
Arguments:
<#>: port, range from 1 to 8
Example:
SS2GD8I (port)# show detail-counter 5