Amer Networks SS2GD8I - Manual (Page 128)

122
set mode
Syntax: set mode [up-link]
Description: Switches VLAN mode.
Arguments:
: can be “disable” to disable VLANs, “tag” to set tag-based VLAN, “port” to set port-based VLAN,
“metro” to set metro mode VLAN, or “double-tag” to enable Q-in-Q function.
[up-link] (optional): can be “7”, “8”, or “7,8”, only for metro mode VLAN
Example:
SS2GD8I(vlan)# set mode port
set port-group
Syntax: set port-group
Description: Adds or edits a port-based VLAN group.
Arguments:
: port-VLAN name
: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
Example:
SS2GD8I(vlan)# set port-group VLAN-1 2-5,6,8
set port-role
Syntax: set port-role [vid]
Description: Sets egress rule and configures port roles.
Arguments:
: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
: can be “access” to not tag frames, “trunk” to tag all frames, or “hybrid” to tag all frames except a
specific VID.
[vid] (optional): untag-VID for hybrid port, range from 1-4094.
Example:
SS2GD8I(vlan)# set port-role 5 hybrid 6