Amer Networks SS2GD8I - Manual (Page 108)

102
set monitored-port
Syntax: set monitored-port
Description: Sets which port(s) will be monitored. Packets received by this port will be copied to the
monitoring port.
Arguments:
: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
Example:
SS2GD8I(mirror)# set monitored-port 3-5,8
set monitoring-port
Syntax: set monitoring-port <#>
Description: Sets the port that will receive the mirrored packets. Administrators can view the packets that
the monitored port(s) receives via this port.
Arguments:
<#>: the monitoring port. Only one port is allowed to configure, ranges from 1 to 8
Example:
SS2GD8I(mirror)# set monitoring-port 2
show
Syntax: show
Description: Displays the port mirroring settings.
Arguments: None.
Example:
SS2GD8I(mirror)# show
Mirror Mode : rx
Monitoring Port : 2
Monitored Port : 3 4 5 8
> port
clear counter
Syntax: clear counter
Description: Clears all ports’ counters (including simple and detail port counters).
Arguments: None.
Example:
SS2GD8I (port)# clear counter