Amer Networks SS2GD8I - Manual (Page 124)

118
set priority
Syntax: set priority
Description: Sets the LACP system priority.
Arguments:
: available from 1 to 65535.
Example:
SS2GD8I(trunk)# set priority 33333
set trunk
Syntax: set trunk
Description: Sets up a trunk, including the group number, mode, and LACP mode.
Arguments:
: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
: can be “static” to adopt the static link aggregation or “lacp” to adopt a dynamic link
aggregation using link aggregation control protocol.
: range from 1-8.
: can be “active” to set the LACP to active mode or “passive” to set the LACP to passive
mode
Example:
SS2GD8I(trunk)# set trunk 1-4 lacp 1 active
show aggtr-view
Syntax: show aggtr-view
Description: Displays the aggregator list.
Arguments: None
Example:
SS2GD8I(trunk)# show aggtr-view
Aggregator 1) Method: None
Member Ports: 1
Ready Ports: 1
Aggregator 2) Method: LACP
Member Ports: 2
Ready Ports: