Amer Networks SS2GD8I - Manual (Page 106)

100
>> edit
set
Syntax: set name [vid ] [ip ] [port ] [type ] action [
]
Description: Edits a management policy record.
Arguments:
name : access control list (ACL) user name.
vid (optional): VLAN ID, range from 1-4095 or “any”, default is “any”.
ip (optional): IP range that user can log in from, or “any”, e.g. 192.168.1.90-192.168.1.90, default is
“any”.
port (optional): Physical port that user can log in from, can be a single port (e.g. “1”) or a range of
ports (e.g. “5-7”), range from 1-8, default is all ports.
type (optional): Access type for user, can be “h” for HTTP, “s” for SNMP, “t” for Telnet, or “any”, or a
combination of two of the three, separated by a comma, default is “any”.
action : a(ccept) or d(eny).
Example:
SS2GD8I(management)# edit 1
SS2GD8I(management-edit-1)# set name Tom vid 2 ip 192.168.1.30-
192.168.1.80 port 1-2 type s action d
SS2GD8I(management-edit-1)# show
#: 1
Name : Tom VlanID : 2 IP : 192.168.1.30-192.168.1.80
Type : SNMP Action : Deny Port : 1,2
show
Syntax: show
Description: Shows all management policy records.
Arguments: None.
Example:
SS2GD8I(management)# show
#: 1
Name : Tom VlanID : 2 IP : 192.168.1.30-192.168.1.80
Type : SNMP Action : Deny Port : 1,2