Amer Networks SS2GD8I - Manual (Page 117)

111
show
Syntax: show
Description: Displays the SNMP configuration.
Arguments: None.
Example:
SS2GD8I(snmp)# show
SNMP : Enable
Get Community: public
Set Community: private [Enable]
Trap Host 1 IP Address: 192.168.1.1 Port: 162 Community: public
Trap Host 2 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 3 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 4 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 5 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 6 IP Address: 0.0.0.0 Port: 162 Community: public
> stp
MCheck
Syntax: MCheck
Description: Forces the port to transmit RST BPDUs.
Arguments:
: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
Example:
SS2GD8I(stp)# Mcheck 1-8
disable
Syntax: disable
Description: Disables STP.
Possible values: None.
Example:
SS2GD8I(stp)# disable
enable
Syntax: enable
Description: Enables STP.
Arguments: None.
Example:
SS2GD8I(stp)# enable