Amer Networks SS2GD8I - Manual (Page 112)

106
> qos
set advance-layer4
Syntax: set advance-layer4 <#>
Description: Sets the class of ports on advanced mode for Layer 4 QoS.
Arguments:
: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
<#>: special UDP/TCP port selection, range from 1-10.
: TCP/UDB port, range from 0-65535.
: default class (all other TCP/UDP ports), can be 1 (high) or 0 (low).
: special TCP/UDP class, can be 1 (high) or 0 (low).
Example:
SS2GD8I(qos)# set advance-layer4 5 2 80 1 0
set default
Syntax: set default
Description: Sets the priority class of the packets that QoS doesn’t affect.
Arguments:
: class of service, can be 1 (high) or 0 (low).
Example:
SS2GD8I(qos)# set default 1
set diffserv
Syntax: set diffserv
Description: Sets class of ports for IP DiffServ QoS.
Arguments:
: DSCP field, can be a single number (e.g. “1”) or a range of numbers (e.g. “5-7”), range from
0-63.
: class of service, can be 1 (high) or 0 (low).
Example:
SS2GD8I(qos)# set diffserv 0-20 1