Amer Networks SS2GD8I - Manual (Page 59)

53
3.16.2 Email/SMS
The Email/SMS Configuration page (figure 3-53) allows the user to configure the email and SMS settings
for the switch to use to contact the network administrator. An email address and/or a mobile phone
number has to be set in order for traps to be sent to users using those methods. The switch supports up
to 6 email addresses and 6 mobile phone numbers. The 24 different trap events will also be sent to an
SNMP Manager when a trap event occurs. Click “Apply” to save the changes once entered.
Note: SMS may not work with your mobile phone carrier. Different carriers use different
customizations. This should be tested before being used in a live environment.
Figure 3-53: Alarm Configuration Page
Mail Server: The IP address of the SMTP server.
Username: The username on the SMTP server used for authentication.
Password: The password on the SMTP server used for authentication.
Email Address 1-6: The email addresses to send the alarm messages to.
SMS Server: The IP address of the SMS server (contact your cell carrier to find out if this is supported).
Username: The username for your ISP.