AEC VacTrac Series Conveying Systems - Manual (Page 8)

VacTrac™ Conveying Systems 12-Station Controllers Page 7
1 General Information
1-1 Equipment Function
AEC/Whitlock VacTrac™ systems create vacuum for conveying
pelletized or granular material in a central material handling
system.
A typical use is an in-plant distribution system for plastic
processing plants.
1-2 Necessary Documents
The documents below are necessary for proper installation, opera-
tion and maintenance of VacTrac™ conveying systems. You can
obtain additional copies from the AEC/Whitlock Service
Department at AEC, Inc. Make sure that the appropriate
personnel are familiar with these documents:
• This product manual.
• The VacTrac™ Mechanical Components product manual.
• Electrical schematic and connection diagrams.
• Blower and electric motor information sheets.
• Operation and Installation manuals for installed options and
accessories.
1-3 System Capabilities
VacTrac™ central vacuum systems are as varied as the
applications they service. The tubing and equipment furnished in
an AEC/Whitlock system are designed to convey the material(s)
specified at the time of purchase at specific rates and distances.
AEC/Whitlock can advise you on your system capabilities based
on system makeup, distance, material, and conveying rates you
want.