AEC VacTrac Series Conveying Systems - Manual (Page 64)

VacTrac™ Conveying Systems 12-Station Controllers Page 63
OEM MENU ACCESS
IS NOW AVAILABLE!
OEM SETTINGS?
NO/YES
SET RAMP UP TIME?
NO/YES
To gain access to the OEM service menu:
„ Remove power from the controller.
„ Press and hold the Zero 0 key and re-apply power. While
holding the Zero 0 key, allow the controller to initialize.
The controller displays the message below and permits access
to the OEM service menu.
Gain access to the OEM service menu by entering the menu
system. An additional menu screen is shown below.
Setting the Ramp Up Time
At the above message prompt:
„ Press the YES key to enter the Ramp Up Time menu.