AEC VacTrac Series Conveying Systems - Manual (Page 65)

Page 64 12-Station Controllers VacTrac™ Conveying Systems
SELECT PUMP 1 OR 2
USE KEYPAD TO ENTER
RAMP UP DLY: 1.500s
SETTING FOR PUMP n
SET RAMP DOWN TIME?
NO/YES
Ramp up time is a delay that allows the pump to establish full
speed before the valve opens. This delay defaults to 1.5
seconds and should not be altered unless instructed to do so
by the AEC Service Department.
Select the pump for altering ramp up time.
Using the keypad:
„ Enter the new time and press the ENTER key to save the new
setting.
Setting the Ramp Down Time
At the above message prompt:
„ Press the YES key to enter the Ramp Down Time menu.