AEC VacTrac Series Conveying Systems - Manual (Page 53)

Page 52 12-Station Controllers VacTrac™ Conveying Systems
ALARM AFTER 3 LOADS
PRESS ENTER TO SAVE
PUMP SETTINGS?
NO/YES
To retain the original setting:
„ Press the SET key.
The next station in the sequence displays.
To exit from the Alarm Setting time menu and return to the Station
Settings menu:
„ Press the CLEAR key.
7-4 Pump Settings Menu
The Pump Settings menu lets you set all pump parameters. These
include:
• Pump Mode
• Blowback
• Delay Time
To enter the Pump Settings menu:
„ Press the MENU key while in OFFLINE operation state.
„ Continue to press the MENU key until the following screen
displays: