AEC VacTrac Series Conveying Systems - Manual (Page 52)

VacTrac™ Conveying Systems 12-Station Controllers Page 51
TO SELECT A STATION
PRESS STATION <1-12>
ALARM 11: ENABLED
Y=ENABLE N=DISABLE
To alter the Input Delay time:
„ Press the YES key.
The following screen displays.
To alter stations alarm settings:
„ Select a station to alter, then press the related Station STnn
key. nn is the station number you selected.
The screen displays the selected station ( 11 in the following
example) and the current station alarm setting.
To enable the alarm:
„ Press the YES key.
The alarm is enabled on the station you selected.
- or -
To disable the alarm:
„ Press the NO key.
The alarm is disabled on the station you selected.
The controller increments to the next station in sequence.