AEC VacTrac Series Conveying Systems - Manual (Page 54)

VacTrac™ Conveying Systems 12-Station Controllers Page 53
PUMP MODE?
NO/YES
SET PUMP MODE
Y=SINGLE N=DUAL
To enter the Pump Settings menu:
„ Press the YES key.
Changing the Pump Mode, Pump Settings Menu
Your 12 Station VacTrac control system can operate as a single
pump system (default) or, with a few key strokes, you can
configure it as a dual pump system. After entering the Pump
Settings menu, the first option is the Pump mode.
When the following screen displays:
„ Press the YES key.
The following screen displays:
To select Single pump mode:
„ Press the YES key.
- or -
To select Dual pump mode:
„ Press the NO key.