AEC VacTrac Series Conveying Systems User Manual
Conveying system mechanical components
Conveying System
Mechanical Components
Part Number: A0536580
Bulletin Number: WH2-605A.6
Effective: 3/1/05
Write Down Your Serial Numbers Here For Future Reference:
_________________________ _________________________
_________________________ _________________________
_________________________ _________________________
We are committed to a continuing program of product improvement.
Specifications, appearance, and dimensions described in this manual are subject to change without notice.
DCN No. ____________
© Copyright 2005
All rights reserved.
Table of contents
Document Outline
- Credit Returns
- Warranty Returns
- Charts and Figures
- Safety
- Functional Description
- Models Covered in This Manual
- General Description
- Standard Features & Options
- SRI Series Inventory Vacuum Receivers
- Pumps
- Blowback Pumps
- VTTV TurboVac Series Pumps
- APC Centrifugal Pumps
- Rated performance is at standard atmosphere and sea level conditions. High elevation affects system performanceSRH/SRC Vacuum Receivers
- Vacuum Receivers
- Atmospheric Valves
- Sequence T-Valves
- Cartridge-Style Vortex Filter Chamber
- FC Series Bag-Style Filters
- ACA Series Filter Chambers
- AFC-S Series Filters
- Take-Off Compartments and Pickup Tubes
- Safety Devices and Interlocks
- Installation
- Uncrating the Equipment
- Rigging and Placing Mechanical Components
- Compressed Air Blowback Connection
- Implosion Blowback Connection
- Compressed Air Connections
- Making ACA Series Filter Chamber Compressed Air Connections
- Making Pump Compressed Air Connections
- Connecting Vacuum Receivers with Atmospheric Valve Compressed Air Lines
- Connecting Vacuum Receivers with Sequence-T Valve Compressed Air Lines
- Running Remote Proportioning Valve or Proportioning Vacuum Receiver Compressed Air Lines
- Electrical Connections
- Initial Start-up
- Making Startup Checks
- Adjusting Sight Glass Proximity Sensor Sensitivity
- Adjusting Air Pulse Duration: All Models
- ACA Series Filter Chamber Pre-Operation Checklist
- Adjusting Time Between Air Pulses on ACA Filters
- Adjusting the Number of Air Pulses
- Starting ACA Series Filter Chamber Units
- Adjusting Proximity Sensor Sensitivity
- Operation
- Maintenance
- Preventative Maintenance Schedule
- Preventative Maintenance
- Maintaining Pump Packages
- *APD style vacuum blowers require a synthetic blend of lubricant for proper operation. Using other types of lubricant may void all warranties.
- Maintaining Filter Chambers
- Inspecting ACA Series Filter Chamber Filter Bags
- Maintaining VTPB Series Vacuum Power Unit Non-Reversing Valves
- Servicing and Reassembling Lower Valves
- Maintaining Vacuum Receivers and Filter/ Receiver Combinations
- Cleaning the Collection Bin (All Models Except VFC 225 and VFC 1000)
- Cleaning the Filter Shroud (VFC 225 and VFC 1000 Only)
- Corrective Maintenance
- Troubleshooting
- Appendix