AEC VacTrac Series Conveying Systems User Manual
Page 27
Page 26
12-Station Controllers
VacTrac™ Conveying Systems
Key Descriptions
Number Keys
Use the ten (10) numeric keys marked
1
to
0
to enter numerical
information on the controller.
Station Keys
Press one of the 12 station keys marked
ST1
to
ST12
to select or
activate the specific station or hopper you want.
START/STOP Key
Press the
START/STOP
key once to start the loading sequence.
Press the
START/STOP
key again to stop the loading sequence.
SET Key
Press the
SET
key to set hopper loading times. Using the
SET
key
also permits you to increment through each of the twelve (12)
stations/hoppers when setting loading times. Press the
SET
key to
save the updated value of the parameter you set, then increments to
the next station.
CLEAR/PRIOR Key
Press the
CLEAR/PRIOR
key to initiate the priority convey
sequence; this key also acts much like an escape key.
NO/YES Keys
Press the
NO
or
YES
keys to answer questions or prompts while
you are using the menu system.
ENTER/MENU Key
Press the
ENTER/MENU
key to save any data you entered in the
controller memory. You can also press the key to let you enter the
menu system
.