AEC VacTrac Series Conveying Systems - Manual (Page 30)

VacTrac™ Conveying Systems 12-Station Controllers Page 29
SET ACTIVE PUMP
SELECT PUMP 1 OR 2
STATION SETTINGS?
NO/YES
If you have a single pump system (default):
„ Press the YES key.
Selecting Single Pump mode requires the assignment of the
default pump; the screen then displays the following:
Selecting Dual Pump mode requires all stations to be assigned to a
pump. Do so in the Station Settings Menu.
The pump mode is now set.
To exit from the Pump Settings Menu:
„ Press the CLEAR key.
Note: You can always press the CLEAR key repeatedly to bring
you up one level in the menu system.
5-3 Assigning a Pump to a Station
This function lets you easily set all 12 stations.
From the main operating screen:
„ Press the MENU key until the following screen displays: