AEC VacTrac Series Conveying Systems - Manual (Page 34)

VacTrac™ Conveying Systems 12-Station Controllers Page 33
„ Using number keys 1 to 0 , enter the new time.
Then:
„ Press the ENTER key to save the new setting into controller
memory.
If several stations require altering:
„ Press the SET key instead of the ENTER key.
The new settings are saved and the station number increments
to the next station in sequence.
Press the
SET key without entering a value to retain the
original value in controller memory.
The load time range of the station is from 1 to 360 seconds.
Entering values beyond this range result in the screen displaying
three (3) question marks
??? .
To abort this erroneous entry and return to normal operation mode:
„ Press the CLEAR key.
5-5 Enabling and Disabling Individual Stations
Except while you are in the menu system and when you are
altering system parameters, you can enable or disable any station
in the system.
To enable or disable a loading station:
„ Press the STnn key (where nn is the station number you want)
to toggle between station enable or disable mode.