AEC VacTrac Series Conveying Systems - Manual (Page 69)

Page 68 12-Station Controllers VacTrac™ Conveying Systems
SELECT PUMP 1 OR 2
USE KEYPAD TO ENTER
HIVAC DELAY: 3.000s
SETTING FOR PUMP n
HI VAC VENT DELAY?
NO/YES
At the above message prompt:
„ Select the pump for altering vacuum sensor delay.
The following screen displays:
Using the keypad:
„ Enter the new time and press the ENTER key to save the new
setting.
Setting the Hi Vacuum Vent Delay
At the above message prompt:
„ Press the YES key to enter the Hi Vacuum Vent Delay Time
menu.
Hi vacuum vent delay is the vent time initiated by a high
vacuum condition. This delay defaults to 10.0 seconds and
should not be altered unless you are instructed to do so by the
AEC Service Department.