AEC VacTrac Series Conveying Systems - Manual (Page 42)

VacTrac™ Conveying Systems 12-Station Controllers Page 41
7 Using the Menu System
7-1 Introduction
Besides the load time setting, to convey the material most
efficiently, you’ll need to set several parameters. The controller
uses a menu system that lets you easily set system parameters.
7-2 Gaining Access to the Menu System
To enter the menu system, make sure that the controller is in the
OFFLINE state. Press the MENU key to initiate the menu system.
The menu has three (3) top level menus:
• Station Settings
• Pump Settings
• System Settings
Press the CLEAR key in the menu system to bring you up one
level.