AEC VacTrac Series Conveying Systems - Manual (Page 32)

VacTrac™ Conveying Systems 12-Station Controllers Page 31
To assign Pump 1 to the station you selected:
„ Press 1 .
- or -
To assign Pump 2 to the station you selected:
„ Press 2 .
To save the new setting and display the Station Assignment screen:
„ Press the ENTER key.
To save the new pump assignment and increment to the next
station sequence:
„ Press the SET key.
To exit the Station Settings menu:
„ Press the CLEAR key.
Then:
„ Press the CLEAR key repeatedly to exit to the next higher
menu, or to exit the menu system.
!
CAUTION
You must assign the correct pump to a hopper before
starting the conveying process.
Failure to properly assign pumps can result in
damage to the conveying system!