AEC VacTrac Series Conveying Systems - Manual (Page 24)

VacTrac™ Conveying Systems 12-Station Controllers Page 23
Station Icons
Below the text portion of the screen, 12 station icons display the
status of each station in the system. Each station icon contains four
segments.
Figure 3
Station Icon Segments
Segment 1
The top segment indicates the status of the valve above each
station. When the valve is open (control output energized), this
icon highlights. In Single Pump mode, only one valve indicator is
active at a time. In Dual Pump mode, up to two valve indicators
can be active at a time. When this indicator flashes, it indicates the
assignment of a priority convey.
Segment 2
The center square segment indicates the existence of a station
specific alarm condition. The alarm is typically related to a No
Convey condition, but can also indicate the station with a high
vacuum condition.