Welltech ePBX80 V.1.1 - Manual (Page 95)

Welltech Technology Co., Ltd. 95
 Set up IP information for LP389S IP Phone. You can set the IP information of LP389S from
its LCD via navigation keys, or you can login its WEB interface by default IP
10.1.1.3 . Go to
“Device Setting  Network” to setup network as follows, then press Apply. For more
information about LP389S, Please go to Welltech Web Site at Support and downloadIP
Phone LP-389S
LP389_v106 User Guide.zip to download for configuration reference.
See the following webpage.
Step 2: Configure Extensions
 In ePBX80, prepare Extension accounts for Client device. (There are 10 default Extensions,
from 101 to 110, so we use the default setting for this Example). See the following ePBX80
webpage. These extensions can be external IP Phone or FXS Gateway. For more information
about Extension page, please go to user’s manual
CH3 Full Web Configurations.