Configure of this case (see figure 1), Introduction of network environment, Start to configure epbx80 – Welltech ePBX80 V.1.1 User Manual
Page 125
Welltech Technology Co., Ltd.
125
Configure of this case (see figure 1):
1. Introduction of network environment
ADSL Modem for Epbx80 WAN port and Router (with DHCP server) use. (set
for static IP or PPPoE, we suggest you to use static IP,
for instance: we set
WAN IP is 61.218.42.211, subnet mask is 255.255.255.240, default
gateway is 61.218.42.209
)
DHCP server for IP Phone or PC to use in private network
(
For instance: we set IP range is 192.168.1.2 ~192.168.1.123 for static
IP and 192.168.1.124~192.168.1.254 for DHCP
)
Epbx80 LAN port used
static IP
192.168.1.123
(default is
192.168.123.123)
2. Start to configure Epbx80
Step 1: to connect LAN port IP with 192.168.123.123 by IE browser.
Step 2: to be changed LAN port IP to 192.168.1.123 / subnet mask
255.255.255.0, WAN port IP to 61.218.42.211, subnet mask
255.255.255.240, default gateway 61.218.42.209.
(see figure 2)