Welltech ePBX80 V.1.1 - Manual (Page 86)

Welltech Technology Co., Ltd. 86
3.5.5 Firmware Upload
Click Management, and then click the Firmware Upload table. The screen appears as
follows.
Figure 3.5.5-1 Firmware Upload
The following table describes the features in this screen.
Table 3.5.5-1 Firmware Upload
Label Description
Application, Library Select one option to upload ePBX80 Firmware from your
computer.
The default is Application .
Firmware Upload
File Type in the location of the file you want to upload in this field or
click the Browser button to find it.
Browse Click Browser to find the file you want to upload.
Apply Click the Apply button to begin the upload process. This
process may take about two minutes.
Cancel Click the Cancel button to exit this screen without saving.
Note:
 Normally, you only need to upgrade the Application but in some situation you may
need to upgrade the Library. For more information, please refer to the released note
of ePBX80.
 After pressing Apply, please wait for successful message appeared, and DO NOT
power off.
 After upload successfully, on screen will show up successful messages. Please reboot
system to renew system firmware.