beautypg.com

Welltech ePBX80 V.1.1 User Manual

Page 66

background image


Welltech Technology Co., Ltd.

66

Third, Fourth, Fifth,
Sixth, Seventh and
Eighth

to route to primary destination three times, it will try to route to
secondary or third destination until eighth destination.

Destination

Each Priority has one destination number to fill in.

Note:

 Before setting up the Routing Table, Trunk information in

the Trunk page has to be configured first. Then this field
contains the Trunk ID for choosing.

 If the Trunk was set up to Dynamic in the Host field and it

doesn’t register ePBX80, it will skip this “priority” directly
and route call to next priority immediately. If the Trunk was
set up to an Address in the Host field and this Address is
not reachable, ePBX80 will try three times first. If it still
fails, ePBX80 route call to next priority.

Add

To add assigned number in front of dial number. For example,
you set up 02 here and the called number is 03123, ePBX80
add 02 and send out 0203123 as the called number.

Drop

To drop specified length of number. For example, you set up
2 here and the called number is 03123, ePBX80 drop 03 and
send out 123 as outgoing number.

Note: If you set up both Drop and Add features, ePBX80 will
implement Drop first and then Add. DROP has the first
priority than ADD to implement at this route rule.

Route Password

Set up password here, ePBX80 will request password before
sending the dialing number to Trunk. ePBX80 will play IVR
announcement to ask for entering password to verify authority.

Routed Features

Fixed Outgoing Call
Rule

ePBX80 will use the Fixed Trunk ID to route this call from
extension if you have enabled

both Fixed Outgoing Call Rule

here and Fixed trunk ID at Extension Setting

. That means

ePBX80 will route the call to a fixed Trunk ID if you enable this

feature. For example, you have set up Fixed Trunk ID to 888 at
extension 101. And you enable Fixed Outgoing call Rule for a
certain route record, such as 8 with length 10. When extension
101 calls a number at 8xxxxxxxxx, ePBX80 will route this call to
888 no matter what Primary Destination number you have
setup for such route record at extension 101.

Note: For more information about Fixed Trunk ID, please refer

This manual is related to the following products: