Welltech ePBX80 V.1.1 - Manual (Page 94)

Welltech Technology Co., Ltd. 94
CH5 Appendix
5.1 Application between Welltech CPE device and ePBX80
SIP Extensions register to ePBX80
Step 1: Setup network for ePBX80 and iP380 or LP389S IP Phone
 Set up ePBX80 with WAN [IP_Address:61.218.41.183, Netmask: 255.255.255.240,
Gateway: 61.218.41.177, DNS: 168.95.1.1], LAN [IP_Address:192.168.22.100, Netmask:
255.255.255.0]. After setting finish, please press Apply and reboot your ePBX80. When you
got a new ePBX80, you can connect its LAN port to configure Network Setting first. The
default LAN IP address is 192.168.123.123. For more information, please refer to user’s
manual
CH2. Start to configure SIPPBX ePBX80. See the following page.